High-adhesion, two-component 1:1 epoxy for protecting steel, ceramic, and concrete surfaces, with functional cure in one hour.
Protection against impact and abrasion from coarse material in chutes, mills, crushers, pumps, and other critical equipment.
In chutes, hoppers, and transfer points, impact and abrasion from coarse material progressively reduce lining thickness, expose the substrate, and accelerate wear under vibration.When moisture or chemicals are also present, the surface becomes exposed and the damage progresses faster.
These conditions increase reactive maintenance requirements, extend equipment downtime, and raise the costs associated with lost operational continuity.
DURAFAST® MX1 is designed to extend equipment service life by protecting and rebuilding surfaces exposed to impact, abrasion, and severe wear. Its controlled on-site application and one-hour functional cure help reduce time to return to service.
High-strength epoxy resin with controlled application for reliable protection in areas exposed to severe impact and abrasion.
Excellent adhesion to steel, ceramic and concrete for protecting critical equipment.
Formulated with 3 mm aluminum oxide balls to withstand severe wear.
Enables controlled application on vertical and overhead surfaces, improving placement and coverage.
Provides more working time for safe, waste-free application.
An alternative for emergencies requiring faster curing in cold conditions.
Designed for –15°C and compatible with an accelerator.
Dimensional stability that reduces the risk of premature failure.
Suitable for exposure to hydrocarbons, diluted acids, 10% sulfuric acid, and strong bases.
Accurate, fast, and reliable preparation for on-site application.
Common applications for protecting and rebuilding equipment exposed to impact and abrasion from coarse material.
Chutes, feed boxes, and discharge boxes
Lining and repair in areas where material impact and sliding abrasion cause accelerated wear.
Cyclones and hydrocyclones
Protection in flow and turbulence zones to reduce internal erosion and progressive wear.
Pump casings
Restoration of surfaces degraded by abrasion and material impact during operation.
Mills and crushers
Protection of components exposed to impact and abrasion that cause severe wear and material loss.
Pot life (25 °C/77 °F)
35 minutes
Functional cure, light loads
60 minutes
Mix ratio
1:1
Hardness after cure
87,0 SHORE D
Dry temperature resistance
150 °C/302 °F
Tensile strength
29,65 N/mm² / 4.300 psi
Compressive strength
75,84 N/mm² / 11.000 psi
Real applications and results that support the use of DURAFAST® MX1.
PROBLEM:
Wear and corrosion on the lifter’s ceramic-lined surfaces caused by acid flow.
SOLUTION:
DURAFAST® MX1 was applied to the drum lining to provide effective protection against wear and corrosion.
RESULT:
Contact our specialists. They will help you find the best solution based on the equipment, problem, or urgent situation you need to address.
Our products support a wide range of applications. Tell us about your operation and current needs, and our team will help identify the right product, service, or technical solution.
Brasil
Av. Niágara, 398,
Jardim Canadá, Nova Lima-MG, Brasil, 34007-652
+55 31 3581 3545
Panama
Zona Franca PanaPark, Av. Panamericana, Corregimiento 24 de diciembre, Galería 22
Ciudad de Panamá
+507 310 8547
For international Sales:
Em breve, nossa equipe comercial entrará em contato com você.
Verifique sua caixa de entrada (e a pasta de spam ou promoções) para garantir que você receba as informações.